[This article was first published on ** R on R (for ecology)**, and kindly contributed to R-bloggers]. (You can report issue about the content on this page here)

Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.

Today I’m going to talk about a useful family of functions that allows you to repetitively perform a specified function (e.g., `sum()`

, `mean()`

) across a vector, list, matrix, or data frame. For those of you familiar with ‘for’ loops, the `apply()`

family often allows you to avoid constructing those and instead wrap the loop into one simple function.

I’m going to discuss the functions `apply()`

, `lapply()`

, `sapply()`

, and `tapply()`

in this blog post (as well as using the dplyr library for similar tasks). These functions all end in `apply()`

because you *apply* the function you want across all the specified elements.

Let’s see how they work.

## The `apply()`

function

Let’s start with the `apply()`

function. First, we’ll create an example data set. This data set is in wide format* and describes the heights of five individuals (e.g., plants) in inches at three different time points (0, 10, and 20 days). The first column contains the IDs for each individual, and each successive column describes their heights at time points 0, 10, and 20 in that order.

*Note: *Wide format* refers to having multiple repeated variations of the same column. In this example, *Long format* would entail having just one column for ‘height’ with the values 0, 10, and 20 listed below.

# Create data frameexample <- data.frame(indiv = c("A", "B", "C", "D", "E"),height_0 = c(15, 10, 12, 9, 17),height_10 = c(20, 18, 14, 15, 19),height_20 = c(23, 24, 18, 17, 26))# View the data framehead(example)## indiv height_0 height_10 height_20## 1 A 15 20 23## 2 B 10 18 24## 3 C 12 14 18## 4 D 9 15 17## 5 E 17 19 26

`apply()`

lets you perform a function across a data frame’s rows or columns. In the arguments, you specify what you want as follows: `apply(X = data.frame, MARGIN = 1, FUN = function.you.want)`

. First, you enter the data frame you want to analyze, then `MARGIN`

asks you which dimension you want to analyze. `MARGIN = 1`

indicates that you want to analyze across the data frame’s rows, while `MARGIN = 2`

analyzes across columns. Then you enter the name of the function that will be applied to the rows or columns (don’t include parentheses or function arguments).

So let’s try finding the mean plant height for each row (i.e., for each individual). We also have to subset our data to only contain height values (columns 2 through 4) because our first column contains the individual identifiers.

# Calculating the mean for each row in the data framerow.avg <- apply(X = example[, 2:4], MARGIN = 1, FUN = mean)# View row.avgrow.avg## [1] 19.33333 17.33333 14.66667 13.66667 20.66667

This returns a vector where each position corresponds to the row number that was averaged. Individual A’s average height is in position 1, B’s is in position 2, etc.

If we find the mean for each column (i.e., each time point), it returns a vector with named positions for each column that was analyzed.

# Calculating the mean for each column in the data framecol.avg <- apply(example[, 2:4], 2, mean)# View col.avgcol.avg## height_0 height_10 height_20## 12.6 17.2 21.6

Note: I used finding the mean as an example, but if you were actually trying to find the mean across the rows or columns of a data frame, you should use the `rowMeans()`

or `colMeans()`

functions instead of `apply()`

, as they work more efficiently.

You don’t just have to use pre-made functions like `sum()`

or `mean()`

. You could also write your own function to use. In the code below, I wrote a function that tells you if the average plant height is above 15 inches.

# Create function is_tallis_tall <- function(x) {value <- mean(x) > 15return(value)}# Apply the function to the columns in the data frameapply(example[, 2:4], 2, is_tall)## height_0 height_10 height_20## FALSE TRUE TRUE

This tells me that at time point 0, the plants are not taller than 15 cm on average, while the opposite is true for time points 10 and 20.

## The `lapply()`

function

Let’s look at another function, called `lapply()`

. The “L” in front of “apply” stands for “lists”, because this function is used on list objects and returns a list as well.

I created a list called `plants`

, containing three elements that are each vectors with a length of ten. Each element in the list contains different plant attributes (height, mass, and # of flowers). I used the `runif()`

function to generate random numbers, and used the `sample()`

function to generate random integers between one and ten.

# Set seed so that the randomly-generated numbers are the same each timeset.seed(123)# Create a list using randomly-generated numbersplants <- list(height = runif(10, min = 10, max = 20),mass = runif(10, min = 5, max = 10),flowers = sample(1:10, 10))# View the listplants## $height## [1] 12.87578 17.88305 14.08977 18.83017 19.40467 10.45556 15.28105 18.92419## [9] 15.51435 14.56615#### $mass## [1] 9.784167 7.266671 8.387853 7.863167 5.514623 9.499125 6.230439 5.210298## [9] 6.639604 9.772518#### $flowers## [1] 9 10 1 5 3 2 6 7 8 4

If we wanted to calculate the average value for each list element, we could do it individually:

mean(plants$height)## [1] 15.78248mean(plants$mass)## [1] 7.616846mean(plants$flowers)## [1] 5.5

This method is pretty inefficient and makes us repeat our code. And what if we have more than three list elements? That would be a pain to type out. Let’s try another method.

We could create a for loop and save the results in a vector:

# Create an empty vectorplant_avgs <- c()# Loop the averages for each element and save in our vectorfor(i in 1:3){plant_avgs[i] <- mean(plants[[i]])}# View the vectorplant_avgs## [1] 15.782475 7.616846 5.500000

This method is better because it automates the process, which would be especially useful if our list had a ton of elements. But `for`

loops also take more time to run and construct, and still take up quite a bit of space in our code.

Let’s try one last method: using `lapply()`

to wrap this whole process into a neat function. `lapply()`

doesn’t have the `MARGIN`

argument that `apply()`

has. Instead, `lapply()`

already knows that it should apply the specified function across all list elements. You can just type `lapply(X = list, FUN = function.you.want)`

, like this:

# Use lapply to find the mean of each list elementlapply(plants, mean)## $height## [1] 15.78248#### $mass## [1] 7.616846#### $flowers## [1] 5.5

You’ll notice that the output of `lapply()`

is also a list, where the means of `height`

, `mass`

, and `flowers`

are saved as list elements of the same name. `lapply()`

does the same thing as the for loop, but is far more efficient in terms of space and effort. `lapply()`

ends up being the best of the three methods I just showed you.

## The `sapply()`

function

In the previous example, our means were returned as elements in a list, but each list element was represented by just one value. There wasn’t really any reason for those values to be put in a list format instead of, say, a vector.

This is where the `sapply()`

function comes in. It goes hand-in-hand with `lapply()`

and works the same way, where it can accept a list and a function name as the input. But instead of returning a list, it will return the answers in the simplest possible format. In our case, this would mean returning the answers as a vector like below, which usually makes it easier to work with down the line.

# Use sapply to find the mean of each list elementsapply(plants, mean)## height mass flowers## 15.782475 7.616846 5.500000

## The `tapply()`

function

The `tapply()`

function works in much the same way as the other functions, but allows you to perform an operation across specified groups in your data. For those of you familiar with the `dplyr`

package, this does the same thing as the `group_by()`

and `summarize()`

functions.

Let’s return to our example data set from before, where we described the heights of several different individuals over time. This time, we’re going to write the data in *long format*, so that each row represents one observation. Stay tuned for a tutorial post on reshaping data in R coming soon if you’re interested in learning more about wide vs. long format data.

# Load library to use the pivot_longer() functionlibrary(tidyverse)# Pivot the data so that the data are in long format instead of wide formatexample <- pivot_longer(example, cols = 2:4, names_to = "time", values_to = "height")# Use sub() to get rid of the string "height_" in front of the time valuesexample$time <- sub("height_", "", example$time)# View datahead(example)## # A tibble: 6 × 3## indiv time height## <chr> <chr> <dbl>## 1 A 0 15## 2 A 10 20## 3 A 20 23## 4 B 0 10## 5 B 10 18## 6 B 20 24

You can see that now we have a column for time, with values of 0, 10, and 20. Let’s use `tapply()`

to look at each individuals' heights, grouped by time. The function accepts a new argument called `INDEX`

: `tapply(X = vector.to.analyze, INDEX = vector.to.group.by, FUN = function.you.want)`

. In the code below, I wanted to analyze the height values grouped by time, using the function `mean()`

.

# Use tapply() to find average height by time groupingtapply(X = example$height, INDEX = example$time, mean)## 0 10 20## 12.6 17.2 21.6

Looks good! `tapply()`

returned a vector of values for the average heights at different time points.

Note: You may have noticed that in all of my examples, I’m using `apply()`

across a list or a data frame. Even though the `apply()`

family of functions can be used across a simple vector, there’s often no need to do so. Most functions in R are already “vectorized”, which means the function will be applied to each element of the vector instead of having to loop through one element at a time. For example, the `sqrt()`

function is vectorized. Doing `sqrt(vector)`

and `sapply(vector, sqrt)`

will return the same answer, so using the `apply()`

function is unnecessary. It is almost always faster to use the vectorized function than to run a loop or to use an `apply()`

function, if you have the option. And in some cases, running a `for`

loop might even be faster than using an `apply()`

function. Check out this blog post by Michael Mayer for a great comparison of different methods.

## The `apply()`

functions vs. `dplyr`

functions

Some of you may be wondering about how useful the `apply()`

functions can be after you’ve learned how to use `dplyr`

functions.

I just demonstrated how to use `tapply()`

, but the same thing could have been accomplished in `dplyr`

. Below, I grouped the data by the `time`

column, and created a column called `avg_height`

that calculates the mean height for each time group. See our tutorial here for a more in-depth discussion of the `group_by()`

function.

# Show grouping example in dplyrexample %>%group_by(time) %>%summarize(avg_height = mean(height)) %>%ungroup()## # A tibble: 3 × 2## time avg_height## <chr> <dbl>## 1 0 12.6## 2 10 17.2## 3 20 21.6

This returns a table of values rather than a vector, but it still contains the same basic information. It shows the average heights of individuals at three different time points. So which method is better, `dplyr`

functions or `tapply()`

?

The answer is that it depends on what you’re going to do afterwards! `tapply()`

might be useful to get a quick answer. It’s one easy line of code that tells you the average heights. The `dplyr`

method is useful if you’re going to keep working on the data. The pipe operator (`%>%`

) allows you to use the output of one function as the input of another, without having to create intermediate variables.

For example, in the code below, I wanted to not only summarize the average heights at each time point, but I also wanted to filter out only the heights that were greater than 15. I did that easily by adding another pipe to the end of my previous line and typing the next short bit of code.

# Show grouping example in dplyr and further manipulationexample %>%group_by(time) %>%summarize(avg_height = mean(height)) %>%ungroup() %>%filter(avg_height > 15)## # A tibble: 2 × 2## time avg_height## <chr> <dbl>## 1 10 17.2## 2 20 21.6

There are other `dplyr()`

functions that are analogous to the rest of the `apply()`

family. For example, the `across()`

function works similarly to `apply()`

. Let’s go back to the previous wide format of our `example`

data frame by using `pivot_wider()`

.

# Turn the data frame back into wide formatexample <- pivot_wider(example, indiv, names_from = time, values_from = height)# View data framehead(example)## # A tibble: 5 × 4## indiv `0` `10` `20`## <chr> <dbl> <dbl> <dbl>## 1 A 15 20 23## 2 B 10 18 24## 3 C 12 14 18## 4 D 9 15 17## 5 E 17 19 26

Let’s say we want to convert our height values from inches to centimeters by multiplying by 2.54. We can use the `across()`

function to do this. In the code below, I wrote a quick function that multiplies your values by 2.54 to convert from inches to cm. Then I used the function `mutate()`

to change the data frame. Using `across()`

, I indicated that I wanted to modify columns 2 through 4 using the `to_cm()`

function.

# Write function called to_cm that converts values from inches to cmto_cm <- function(x){cm <- x * 2.54return(cm)}# Convert height from inches to centimetersexample %>%mutate(across(2:4, to_cm))## # A tibble: 5 × 4## indiv `0` `10` `20`## <chr> <dbl> <dbl> <dbl>## 1 A 38.1 50.8 58.4## 2 B 25.4 45.7 61.0## 3 C 30.5 35.6 45.7## 4 D 22.9 38.1 43.2## 5 E 43.2 48.3 66.0

And… ta-da! Our data has now been changed from inches to cm.

If we were to perform an operation across rows in `dplyr`

, we would need to group by rows using the `rowwise()`

function before performing any other operation (it works the same way as the `group_by()`

function, just groups by rows).

Again, using the `dplyr`

functions instead of `apply()`

is up to your own discretion. `apply()`

is an easy, one-line function that can account for row-wise and column-wise operations. But `dplyr`

offers a useful grammar (pipes!) that allows you to keep working smoothly without interruption in your code. Different circ*mstances will call for different methods, and it might take some trial and error before you discover the method that works best for you in each situation.

That concludes our summary of the `apply()`

functions! We learned how to use `apply()`

, `lapply()`

, `sapply()`

, and `tapply()`

, and we discussed equivalent `dplyr`

functions for `apply()`

and `tapply()`

.

Let us know what you think of `apply()`

vs `dplyr`

in the comments! Do you have a preferred method?

Also be sure to check out **R-bloggers** for other great tutorials on learning R

*Related*

To **leave a comment** for the author, please follow the link and comment on their blog: ** R on R (for ecology)**.

R-bloggers.com offers **daily e-mail updates** about R news and tutorials about learning R and many other topics. Click here if you're looking to post or find an R/data-science job.

Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.